by "PSK" <trouzourt@[EMAIL PROTECTED]
>
Apr 13, 2008 at 09:46 PM
the quetsions, trouble shooting and network design are in the lines of the
following:
1) which cable connects to what ? (you will be given devices and u have to
pick which cable is correct)
2) adding IP address and correct subnet to routers (in the simulation)
3) some IP routing issue... I dont believe there was anything that asked
me
to configure any routing protocol from scratch.. most likely, wrong IP
address and or subnet...
4) some frame-relay question, IE: whats wrong with the following set of
configuration...
alot of ppl here will scare the sh1t out of you ... but dont worry .. its
extreamly easy..it took me only 45 minutes to finish the exam and I got a
96.5% while on fairly strong pain killers :p
so good luck..
"Ingot" <cleahy@[EMAIL PROTECTED]
> wrote in message
news:7MmdnRRKD8ItMJ3VnZ2dnUVZ_rSrnZ2d@[EMAIL PROTECTED]
> Is there anyone that has a clue what the "practical" ****tion of the
Cisco
> CCNA Cert exam is like?
>
> I'm confident I can do anything in the book if I have a reference with
me.
>
> I'm confident I can do anything reasonably basic with no reference.
>
> What I can't get confident about is the ability to do the more
complicated
> or esoteric stuff without SOME kind of reference or notes available.
>
> Ingot
>
