Hi
I have a 1605 , and since its got 2 ethernet ****ts I thought i would
like to use it in as a useful part of my network instaed of just a lab
situation.
I'm trying to configure my 1605 router as a gateway to the internet, but
not having much success.
192.168.1.0 is my primary network (172.16.1.16 secondary) and 202.0.62.4
goes to my cable modem (202.0.62.1)
Here's my running-config,
what have i missed ?,
any help please ?
Router#sh conf
Using 683 out of 7506 bytes
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
enable secret 5 $1$K.Ac$8VHFnPMHi2TuvTcZF.NAC/
!
ip subnet-zero
ip name-server 202.0.62.1
!
!
!
interface Ethernet0
ip address 172.16.1.16 255.255.0.0 secondary
ip address 192.168.1.16 255.255.255.0
ip directed-broadcast
ip nat inside
!
interface Ethernet1
ip address 202.0.62.4 255.255.0.0
ip directed-broadcast
ip nat outside
!
router rip
network 172.16.0.0
network 192.168.1.0
network 202.0.64.0
!
ip classless
!
!
line con 0
trans****t input none
line vty 0 4
password cisco
login
!
end
