Re: trying to make a gateway

Grant <virus@[EMAIL PROTECTED]
> wrote:
>Hi
>I have a 1605 , and since its got 2 ethernet ****ts I thought i would 
>like to use it in as a useful part of my network instaed of just a lab 
>situation.
>I'm trying to configure my 1605 router as a gateway to the internet, but 
>not having much success.
>
>192.168.1.0 is my primary network (172.16.1.16 secondary) and 202.0.62.4 
>goes to my cable modem (202.0.62.1)
>
>Here's my running-config,
>what have i missed ?,
>  any help please ?
>
>Router#sh conf
>Using 683 out of 7506 bytes
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname Router
>!
>enable secret 5 $1$K.Ac$8VHFnPMHi2TuvTcZF.NAC/
>!
>ip subnet-zero
>ip name-server 202.0.62.1
>!
>!
>!
>interface Ethernet0
>  ip address 172.16.1.16 255.255.0.0 secondary
>  ip address 192.168.1.16 255.255.255.0
>  ip directed-broadcast
>  ip nat inside
>!
>interface Ethernet1
>  ip address 202.0.62.4 255.255.0.0
>  ip directed-broadcast
>  ip nat outside
>!
>router rip
>  network 172.16.0.0
>  network 192.168.1.0
>  network 202.0.64.0
>!
>ip classless
>!
>!
>line con 0
>  trans****t input none
>line vty 0 4
>  password cisco
>  login
>!
>end



I changed the typo network 202.0.64.0 to network 202.0.62.0
it still doesn't work

thanx